We sell the roofing of two Polish makers: Bratex from Dębica and Budmat from Płock. Modular and cut-to-length tile sheets, standing seam panels, trapezoidal sheets, gutters and flashings, in the RAL colours of both. An advisor works the steel out from your roof plan and the order goes straight to the site.
Every profile is a different roof: a different wave, a different sheet length, a different minimum pitch. In each we have Bratex and Budmat products, so we match the building, not a catalogue.
Profiles in a colouras photographed
Click a colour and every close-up below takes it, with the light and shade of the photo kept. RAL shades are approximate; which colour comes in which coating is shown further down.
01
Modular tile sheet
Short sheets of two modules, with factory holes and a pocket that hides the joints. The usual choice for houses: it looks like tiles, weighs ten times less and gets to the roof in one van.
The classic long sheet cut at the factory to the length of the slope, with no cross joints. The cheapest covering in a tile look, best on plain, large slopes.
Narrow panels clicked together, with no visible screws. A roof of vertical lines, also for very low pitches and for facades. Flat, with a micro-wave or with ribs.
A trapezoidal wave from 8 to 60 mm: T-18 for houses, taller profiles for halls, shelters and farm buildings. The lightest covering of all and the fastest to fit.
Data from the Bratex and Budmat data sheets, as of 2026. Close-ups: the makers’ materials and our own houses.
Coatings
The coating decides the colour and the warranty
The same tile sheet can carry 15 or 75 years of warranty: that depends on the coating, not the profile. Each coating also has its own palette, so the colour is chosen together with it. Below, both makers’ coatings, most durable first.
Bratex
Pural Matt BT
polyurethane 50 µm on 350 g/m² of zinc, the most durable Bratex coating
75 years on the product35 years on the colour
7016
7021
9005
8017
Ceramic Matt Pro BT
ceramic matt 36 µm on 350 g/m² of zinc, a palette of ten colours from nature
75 years on the product30 years on the colour
7037
7042
7010
7044
7003
7006
7032
7002
6013
6011
Ceramic Matt BT
ceramic matt 26 µm on 350 g/m² of zinc
75 years on the product25 years on the colour
9005
8017
8019
7016
8004
3009
Premium Matt Pro
polyurethane 50 µm on 275 g/m² of zinc
50 years on the product25 years on the colour
7016
8017
8019
9005
Ultramat
polyurethane with polyester, 35 µm, 275 g/m² of zinc
50 years on the product20 years on the colour
3009
6020
7016
7024
8004
8017
8019
9005
Dual Matt
modified polyester, 35 µm, 275 g/m² of zinc
40 years on the product20 years on the colour
3009
6020
7016
7024
8004
8017
8019
9005
Regular Gloss
gloss polyester, 25 µm, 275 g/m² of zinc, the cheapest
Warranty years and colours from Bratex and Budmat materials (2026), on the terms of the makers’ warranty cards; Budmat requires the distributor to register the warranty, which we do with the order. The dots show the shades approximately; our branches have steel samples.
Quote
Send your roof plan for a quote
A plan and a section from the design will do, or the slope sizes and the pitch. An advisor counts the sheets, flashings, gutters and screws, and you get a price with delivery.
Steel roofing enquiry from asasak.pl.
For sale
Two factories, one advisor
Bratex from Dębica and Budmat from Płock: two Polish factories whose sheets cover roofs across the country. We sell both, so the advisor matches the profile to the roof, not to a catalogue.
Dębica, Podkarpacie
Bratex
A factory right next to our head office, and we have been its official distributor since we started out. SSAB steel with 350 g/m² of zinc, a quarter more than the standard (275 g/m² on steel from other mills), and a warranty of up to 75 years in the Pural Matt BT coating.
One of the largest Polish makers of steel roofing. Steel from ArcelorMittal and SSAB, X-MATT and D-MATT Plus coatings with a warranty of up to 50 years and a written guarantee of colour repeatability.
You send the plan and section from the design, or the slope sizes and the pitch. If the roof already stands, photos and a tape measure will do.
02
The advisor counts
Sheets with offcuts, ridge caps, barge flashings, eaves flashings, gutters, screws and membrane. You get one offer with a price, not a list to put together.
03
The factory cuts to length
Modular tile sheets are usually available soonest; cut-to-length sheets and panels are ordered to the length of your slope. Colour and coating from one batch.
04
Delivery to the site
The steel goes to the address you give, on pallets, with flashings and accessories in one delivery. Your roofer fits it, or our crew if the schedule allows; we can also recommend a crew we trust.
05
After-sales care
Working together does not end when the steel is sold. We help for the whole time the roof is being laid, and with any question you can come to a branch or call your advisor.
In numbers
Figures worth comparing when choosing steel roofing.
0.5 mmof steel in a tile sheet; panels and trapezoidal sheets also 0.6 and 0.7 mm
275 gof zinc per square metre, at least; Bratex on SSAB steel: 350 g
75years of the maker's warranty in the best coatings
12 mthe longest trapezoidal sheet and panel, cut to length
Which profile for which roof
Modular
Cut to length
Standing seam
Trapezoidal
Look
tiles
tiles
vertical lines
trapezoidal wave
Min. pitch
9 to 12°
9 to 12°
8°
6 to 8°
Sheet
70 cm, 2 modules
up to 7.7 m
up to 12 m
up to 12 m
Transport
a pallet, any van
long sheets, crane truck
long panels, crane truck
long sheets, crane truck
Waste
the least
at valleys and gables
little
at valleys and gables
Price per m²
medium
lowest
highest
low
For whom
houses, complex roofs too
plain, large slopes
modern houses, low pitches
halls, shelters, garages, houses in T-18
Values from the Bratex and Budmat data sheets, as of 2026. Prices are how the profiles compare in the same coating, not a price list.
Questions and answers
Questions about steel roof tiles and standing seam
On an insulated roof, with a membrane and insulation between the rafters, you hear little of the rain, much as under clay tiles. It can be louder under steel on an uninsulated carport or garage.
Modular sheets are short, about 70 cm, usually available soonest and easy to carry up the roof. Cut-to-length sheets are ordered to the length of the slope, up to about 7.7 m, so the roof has fewer cross joints. An advisor matches the profile to the pitch and length of your roof.
It depends on the profile and the maker: steel tiles need at least 9 to 12°, standing seam 8°, trapezoidal sheets 6 to 8°. We check the exact value for the chosen product in the maker's data sheet.
The warranty depends on the coating, not on the profile: up to 75 years in Bratex's Pural Matt BT and up to 50 years in Budmat's coatings. The years and colours of each coating are listed above on this page.
Your roofer, or our crew if the schedule allows; we can also recommend a crew we trust. The steel arrives on site on pallets, with the flashings and accessories in one delivery.
Contact
Talk about your roof
Roofing is sold by Robert in Góra Motyczna, Konrad and Dawid in Jasło and Adrian in Gorlice. Call or write with your roof plan and they come back with a quote.
